- Factory Lead Time
- Moisture Sensitivity Level (MSL)
- Part Status
- Type
- Diameter - Bit
- Material
Attribute column
Manufacturer
Bantam Tools Drill Bits, End Mills
Product | Inventory | Pricing(USD) | Quantity | Datasheet | RoHS | Factory Lead Time | Material | Part Status | Moisture Sensitivity Level (MSL) | Type | Diameter - Bit |
|---|---|---|---|---|---|---|---|---|---|---|---|
 BN1010 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill | Assorted | ||
 TL1008-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Engraving | - | ||
 TL1017-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Engraving | - | ||
 BN1004 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill | - | ||
 TL1012 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Ball | 0.016 (0.41mm) | ||
 TL1004 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Flat | 0.031 (0.79mm) | ||
 TL1001-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Ball | - | ||
TL1007-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Engraving | - | ||
TL1000-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Ball | - | ||
TL1004-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Flat | - | ||
 TL1002 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Flat | 0.125 (3.18mm) | ||
 TL1011 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Ball | 0.031 (0.79mm) | ||
TL1002-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Flat | - | ||
 TL1017 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Engraving | 0.003 (0.08mm) | ||
 BN1002 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill | Assorted | ||
TL1011-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Ball | - | ||
 TL1003 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Flat | 0.063 (1.60mm) | ||
TL1005-10 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | - | Active | Not Applicable | End Mill, Flat | - | ||
 TL1000 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Ball | 0.125 (3.18mm) | ||
TL1008 Bantam Tools | In Stock | - | Datasheet | 2 Weeks | Carbide | Active | Not Applicable | End Mill, Engraving | 0.005 (0.13mm) |